MT4 G3 4WD MONSTER TRUCK RTR
The all-new MT4 G3 is ready to convince your neighbors that the brushless power rules!
Powered by the high torque IBL-40/20 2000Kv brushless motor and twin battery packs, the MT4 G3 can pull wheelies, back flips and get air off the jump easily!
The differentials of the MT4 G3 are equipped with steel spiral bevel gears to help it handle the brutal torque of the IBL40/20 2000Kv motor.
The MT4 G3』s 3mm rigid aluminum chassis and brace are securely mounted and the brace cover features vents to keep the batteries and electronicscool.
The MT4 G3 features full CVD drive shafts and high quality bearings to deliver maximum efficiency to survive from the outrageous torque and abused operation.
In addition to this, the ACE RC cougar 2.4GHz radio system is also included right in the box to give you the most long-range, convenient and reliable radio control.
1/8 Scale Affordable Brushless System Now Is Available!
Thunder Tiger Corp. is pleased to announce the brand new ACE RC brushless speed control and motor for 1/8 scale R/C vehicles. ESC is now available in 80A and 150A, in which the former is perfectly used for buggy and truggy while the latter is mainly used for power-on-demand monster trucks as well as 1/5 scale. The ACE RC IBL4020 2000Kv super brushless system not only provides amazing torque and speed potential for your 1/8 scale vehicle, but supplies a longer operation time due to less friction in the brushless motor compared with other sensored systems. Also ACE RC brushless speed control is compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LPP, Feigao and etc. Moreover, ESC is bullet-proof itself with other multiple protection features such as voltage cut-off protection, over-heat protection, throttle signal loss protection, motor blocked protection and splash/dust proof cover. Our customer would breeze through the system setup with the programming card.
IBL Series Brushless Motor for 1/8 Car
IBL40/20 2000KV
| Motor Type | KV | Diameter mm | Length without Shaft mm | Shaft mm | Shaft length |
| IBL 40/20 | 2000 | 42.0 | 74 | 5 | 18.5 |
| Motor Type | RM OHM | MAX Volts | IO@10V | Continuous Watts | |
| IBL 40/20 | 0.005 | 26 | 2.3A@10V | 1350 | |
Engine Features
1. High efficiency (>90%), the additional heat-sink is unnecessary in most applications.
2. New design with lighter weight but bigger torque.
3. Higher power than the competition, faster acceleration and higher top speed.
4. Top quality materials:
Aluminum shell (case)
High quality magnets
Copper wires of high temperature endurance Good quality bearings
5. Anti-broken rotor with special workmanship
• Compatible with most ST-1 series parts
• Heavy Duty Steel Diff Ring/ Pinion
• Adjustable Steel Turnbuckles
• Compact Molded Chassis Brace And Cover
• New Concept Monster Truck Body
• CNC Machined Aluminum Motor Mount
• CNC Machined Steel Pinion Gear
• Equipped Front/Rear/Center CVD Drive Shafts
• ACE RC Brushless Power System for 1:8 Scale Car
• Center Drive Shaft Guard For Cable Protection
• High Current Super Deans Plugs Included
• Anodized Aluminum Oil-Filled Shocks
• 17mm Aluminum Wheel Hubs
• Rear, Center and Front Fluid Filled Differentials
• S2008MG Metal Gear High Torque Servo For Steering
|
Wheelie bar
Newly developed wheelie bar
Wheel Hubs
17mm Aluminum Wheel Hubs
Beadlock Wheel
Two Pieces Beadlock Wheel
ESC
BLC-150C Performance ESC
Truck Body
New Concept Monster Truck Body
Differentials
Rear,Center and Front Fluid Filled Differentials
Motor Mount
CNC Machined Aluminum Motor Mount
Turnbuckles
Adjustable Steel Turnbuckles
Brace And Cover
Compact Molded Chassis Brace And Cover
Motor
IBL40/20 Powerful B/L Motor
Brushless Power
ACE RC Brushless Power System 1:8 Scale Car
Gear
CNC Machined Steel Pinion Gear
Shocks
Anodized Aluminum Oil-Filled Shocks
Drive Shafts
Equipped Front/Rear/Center CVD Drive Shafts
Plugs
High Current Super Deans Plugs Included
Servo
S2008MG Metal Gear High Torque Servo For Steering
Rear
Rear Center and Front Fluid Filled Differentials
Ring/ Pinion
Heavy Duty Steel Diff Ring/ Pinion
|
|
||||||||||||||||||||
Spare Parts
| 1 |
|
1 |
6401-F